Address Setting AirMaster

Address Setting AirMaster



All AirMaster interfaces have a local screen and a local keyboard to interact with it.
Each AirMaster interface type has a method to set its Airbus485 address.

For instance, it resembles:

You need the User Manual (or the knowledge) of each type of AirMaster Interface you have to configure to know how the address can be set.

Having the list assembled during the preparation. For instance:


Go over all AirMaster Interfaces and set their address to the one in the above list.

For instance, with the above example, you have to set:
  1. The AirMaster Interface installed on Compressor1 to Address 1
  2. The AirMaster Interface installed on NewUnit to Address 4
The User Interface will also assist by providing this information on the screen (for instance):

    • Related Articles

    • Address Setting Overview

      In a Metacentre Core system, the Metacentre Core itself and all Metacentre Core TAGs and all Airmaster interfaces are interconnected with one serial connection based on RS485: Airbus485. Over this serial Airbus485, all communication is taking place ...

    • Address Setting Metacentre Core TAGs

      Metacentre Core TAGs come in 2 variants: Link+ and Drive+. However address setting for these is the same process, independent of the variant. The first step involves a scan executed by the Metacentre Core to detect if all expected Metacentre Core ...

    • Address Setting Validation

      During this phase, all addresses are scanned and verified. As well, a check is performed to see if there are no duplicate addresses in use. It is recommended to double check if the addresses of all compressor assets are set correctly.

    • Metacentre Cyber Console (TX generated web pages): Visual Software Products Manual

      Cyber Console is the Product name for the visual webpages generated by Metacentre TX, a common choice for Metacentre system controller software visualisation.  This manual is available in : English German See attachments tab to download. 

    • How to make a local connection with the TX-box

      1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable.     2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection.   ...

      Customer Effort & Happiness Survey