Address Setting Validation
During this phase, all addresses are scanned and verified.
As well, a check is performed to see if there are no duplicate addresses in use.
It is recommended to double check if the addresses of all compressor assets are set correctly.
Related Articles
Address Setting Overview
In a Metacentre Core system, the Metacentre Core itself and all Metacentre Core TAGs and all Airmaster interfaces are interconnected with one serial connection based on RS485: Airbus485. Over this serial Airbus485, all communication is taking place ...Address Setting Metacentre Core TAGs
Metacentre Core TAGs come in 2 variants: Link+ and Drive+. However address setting for these is the same process, independent of the variant. The first step involves a scan executed by the Metacentre Core to detect if all expected Metacentre Core ...Address Setting AirMaster
All AirMaster interfaces have a local screen and a local keyboard to interact with it. Each AirMaster interface type has a method to set its Airbus485 address. For instance, it resembles: You need the User Manual (or the knowledge) of each type of ...How to make a local connection with the TX-box
1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable. 2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection. ...Wizard
The wizard can be accessed from the LCD screen of the MC CORE or from a PC connected to the LAN. It is only available to users logged in as Super Admin. The wizard provides a step-by-step guide through the Metacentre Configuration process, with each ...