How do I configure my TX-Box to send out messages to my personal email?
First, you need to be logged in as ADMINISTRATOR such that you can change the settings. Choose menu “settings” in the left table of your home screen and click on “accounts”.
Following window will be displayed.
When the settings have been saved, click on “Diagnostic” in the left table.
Following window will be displayed.
To setup your email click on the following button.
(located at the bottom of the screen)
Following window will be displayed.
In case you need an SMTP authentication:
Here you can set the email address (next to “Email from”) which will send the remote message(s) to your specified email address (ref. user account settings).
Once email settings have been configured, reboot (power cycle) the TX box in order to accept the changed configuration.
Note: The TX – Box uses port 25 for SMTP email notification.
Related Articles
Which SD cards can I use for the TX-BOX?
Q :Which types and sizes may be used for the TX-BOX? A :You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. software. You can use 4GB micro SDHC and 8GB micro SDHC, however these are only compatible with TXMETAWS_E09 and higher software. ...The webpage of the TX-box is acting strange. General tips & guides to improve functionality.
SD-card compatibility Make sure a compatible SD-card is inserted into the TX-box. You can use 1GB micro SD and 2GB micro SD for all firmware versions. You can only use 4GB micro SDHC and 8GB micro SDHC for TXMETAWS_E09 and higher firmware. You can ...How to make a local connection with the TX-box
1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable. 2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection. ...How do I reset / restore / update the data and software on the SD-card inside my TX-box?
Before deleting anything from the SD-card, make a complete backup. Configurations done in the ‘DEFNET.JS’ file could be used in the future. In this file settings are stored such as the IP-address. In other words, make a backup, to consult previous ...Update the TX-box software version to the latest software version
Consult the attached PDF document to learn how to complete this procedure. The 'TX_SD_card_content_defaults_E11_Beta_1' is required to complete the process and can be downloaded via the following article. ...