I've installed and commissioned the Metacentre system controller but compressors are loading and unloading erratically. What's happening?
Metacentre system controllers load and unload a group of air compressors to maintain the configured target system pressure measured at the control pressure sensor. Site specific factors such as 'insufficient storage' or 'significant instantaneous changes in air consumption' will influence the Metacentre system controllers control strategy. To overcome the effects of site specific factors, adjustment of the Metacentre system controllers 'tolerance' and 'damping' values can be used. In extreme situations, it may be necessary to widen the Metacentre system controllers PL and PH parameters. For more information, consult the Metacentre Technical Manual.
Related Articles
I've commissioned the Metacentre system controller but my variable speed drive air compressor is regulating between minimum and maximum speed, at the same time a fixed speed air compressors is loading and unloading. What's happening?
Check the reaction time of the variable speed drive air compressor. The variable speed drive air compressor reaction time is the time taken to regulate between its 'minimum' and 'maximum' speed (and output). A variable speed air compressor with a ...Does the Metacentre Master controller work with multiple VSD compressors?
If you connect multiple VSD compressors on the Metacentre Master ( XC/SX/P4). The Master controller will only regulate 1 VSD compressor between his max and minimum speed, the other VSD compressor will react as a FIX speed compressor. ...I'm installing a Metacentre system controller, where's the best place to locate the control pressure sensor(s)?
The system pressure sensor (P) must be located in a position that will continuously experience pressure that is common to all compressors. Refer to Metacentre system controller Technical Manual for further guidance.I've installed my Metacentre system controller and accessories, how do I approach commissioning?
Review our pre-commissioning check list. Review the Technical Manual for the product your commissioning (can be downloaded from the download centre). Obtain the performance data for all connected compressors. Review site specific installation and ...Metacentre VSD Vo kit: Compressor Connectivity Products Manual
This is the current Technical Manual (ref. MANY0705A) that supports Metacentre VSD Vo products. This manual is available in following languages : English (GB) German (DE) French (FR) Russian (RU) See attachment tab to download.