I've installed my Metacentre system controller and accessories, how do I approach commissioning?
Review our pre-commissioning check list. Review the Technical Manual for the product your commissioning (can be downloaded from the download centre). Obtain the performance data for all connected compressors. Review site specific installation and system characteristics. Review the completed 'typical' commissioning form located on the download centre. Always complete the commissioning form for future reference! If you still require technical advice or support, use this support centre to contact us and remember to have completed commissioning forms available on request!
Related Articles
I've installed and commissioned the Metacentre system controller but compressors are loading and unloading erratically. What's happening?
Metacentre system controllers load and unload a group of air compressors to maintain the configured target system pressure measured at the control pressure sensor. Site specific factors such as 'insufficient storage' or 'significant instantaneous ...Commissioning the system: How to achieve, or configure a correct load- and unloading algorithm.
The Metacentre system uses an intern algorithm to determine when to load or un-load a compressor. An algorithm is a very complex mathematical calculation. Below you can find a list of items that influence the load/unload algorithm. The amount of ...I'm using a Metacentre VSD Ma or Vo device to connect and control my variable speed drive air compressor to the Metacentre system controller. How do I approach this?
Thoroughly read the Metacentre VSD Ma or Vo Technical Manual before starting! Overview the generic connection diagrams contained in the Technical manual and visit the download centre to see if there's an available connection diagram for your ...Metacentre XC: System Controller Manual
This is the current Technical Manual (ref. MANY0708A) that supports Metacentre XC products. This latest manual is only available in the English language. See attachments tab to download.Metacentre SX: System Controller Manual
This is the current Technical Manual (ref. MANY0707A) that supports Metacentre SX products. This manual is available in the english language. See attachments tab to download.