IP Settings
There are a lot of resources available of ethernet where IP settings are explained in detail.
Please refer to one of these
Related Articles
How to make a local connection with the TX-box
1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable. 2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection. ...Notes when commissioning a VSD Vo module
1) Enable the use of an internal pressure sensor in Menu P03 IP = 1 if internal pressure sensing is available IP = 0 if not internal pressure sensor is used 2) Make sure parameter IC is set correctly in menu P03 and adjust the jumper inside of the ...Notes when commissioning a VSD mA module
1) Enable the use of an internal pressure sensor in Menu P03 IP = 1 if internal pressure sensing is available IP = 0 if not internal pressure sensor is used 2) Select jumper setting on the XPM-Ao2 output card found inside of the VSD mA module 3) Menu ...User Management
Editing an existing user Creating a new user Creating a new User and deleting an existing User is restricted to Users having Super Admin rights. Use the Save button to store the user settings Credentials Login: Used to log on Email: Event messages to ...How do I reset / restore / update the data and software on the SD-card inside my TX-box?
Before deleting anything from the SD-card, make a complete backup. Configurations done in the ‘DEFNET.JS’ file could be used in the future. In this file settings are stored such as the IP-address. In other words, make a backup, to consult previous ...