Metacentre TX Box 2 - Software Manual

Metacentre TX Box 2 - Software Manual

The Software manual for the TX Box 2 can be accessed and downloaded via the hyperlink below.


Windows 10 or a higher version must be installed on your PC when establishing a direct connection or link between the TX Box 2 and your PC or laptop.
The use of the Google Chrome browser is advised. The use of the Internet Explorer browser is not supported.
Additional Guidance for 4.8 IP Settings in the Software Manual:

Encountering difficulties connecting to the TX Box 2 after manually altering the IP address? It's crucial to recognize that adjustments on your PC or laptop are necessary as well.
If you find yourself unable to establish a connection with your TX Box 2, follow these steps:

1. Navigate to your Network and Sharing Center.



      2. Access your connected Ethernet network and modify its IP address.
          Here's how:

  1. Firstly, identify your connected Ethernet network.
  2. Then, click on Properties in the ensuing dialog box.
  3. Next, select the TCP/IPv4 protocol and click Properties again.
  4. Choose 'Use the following IP address' and input an IP address within the same subnet mask as your TX Box 2. For instance, if your TX Box 2 bears the IP address 192.16.1.50, assign your PC or laptop an IP address like 192.16.1.254.
  5. Once the IP address adjustment is made, click OK to finalize. You should now be able to access your TX Box 2.



To access your TX Box 2, simply enter the IP address or utilize the provided Article and Serial numbers in your web browser.



With these adjustments, you're all set to connect to your TX Box 2 and configure it as needed.

Tip: Record your IP address for future access to the TX Box 2, and ensure it's kept in close proximity to the device itself.