Preparation
Preparation mainly exists of 2 parts:
• Identification of the Compressors
• Retrieval of essential Compressor specifications
It is assumed that all Asset interfaces are properly installed and that the serial Airbus485 communication between the Metacentre Core and the Asset interfaces is installed and tested.
Identification of the Compressors
Each compressor in the compressor room is assigned a unique identification number, ranging from 1 to N (where N represents the total number of compressors).
To ensure clear identification, a sheet of numbered stickers is provided, and each compressor must be labeled with one sticker in a prominently visible location.
For a proper configuration, essential data is required for each compressor.
The required data differs slightly depending on the type of compressor: Load/Unload or Variable.
The required data differs slightly depending on the type of compressor: Load/Unload or Variable.
Retrieving accurate and reliable data is crucial.
If the data is incorrect, all essential calculations for optimal compressor system operation will be compromised, causing the system to function improperly.
This data consists of:
• Power consumption at:
o Maximum speed operation
o Offload operation (motor running but no compressed air produced)
o Variable only: Minimum speed operation
• Air Flow (/ Capacity) at:
o Maximum speed operation
o Variable only: Minimum speed operation
While labeling the compressors, you can consult the information listed on the compressor to retrieve the required data.
Related Articles
Address Setting AirMaster
All AirMaster interfaces have a local screen and a local keyboard to interact with it. Each AirMaster interface type has a method to set its Airbus485 address. For instance, it resembles: You need the User Manual (or the knowledge) of each type of ...Address Setting Overview
In a Metacentre Core system, the Metacentre Core itself and all Metacentre Core TAGs and all Airmaster interfaces are interconnected with one serial connection based on RS485: Airbus485. Over this serial Airbus485, all communication is taking place ...Wizard
The wizard can be accessed from the LCD screen of the MC CORE or from a PC connected to the LAN. It is only available to users logged in as Super Admin. The wizard provides a step-by-step guide through the Metacentre Configuration process, with each ...Metacentre Cyber Console (TX generated web pages): Visual Software Products Manual
Cyber Console is the Product name for the visual webpages generated by Metacentre TX, a common choice for Metacentre system controller software visualisation. This manual is available in : English German See attachments tab to download.