SD card not reachable, what to do?
Q: Why is LED 9 on my TX box flashing red?
A: LED 9 will flash red when your SD card is not recognized by the TX Box.
A possible problem is the wrong type/size of the SD card. You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. software. You can use 4GB micro SDHC and 8GB micro SDHC, however these are only compatible with TXMETAWS_E09 and higher software. Other size or types are not applicable for the TX-Box.
Other situation is that the data on the SD card is corrupt. What to do in this situation is:
- Copy the content of your SD card and save it on a folder on your PC.
- (So you don’t have to reconfigure your settings)
- Format the SD card.
- Recopy the content from your PC back on the SD card.
- Retry to make connection with the TX webpage’s via your browser (best via Chrome)
Related Articles
How do I reset / restore / update the data and software on the SD-card inside my TX-box?
Before deleting anything from the SD-card, make a complete backup. Configurations done in the ‘DEFNET.JS’ file could be used in the future. In this file settings are stored such as the IP-address. In other words, make a backup, to consult previous ...Which SD cards can I use for the TX-BOX?
Q :Which types and sizes may be used for the TX-BOX? A :You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. software. You can use 4GB micro SDHC and 8GB micro SDHC, however these are only compatible with TXMETAWS_E09 and higher software. ...Update the TX-box software version to the latest software version
Consult the attached PDF document to learn how to complete this procedure. The 'TX_SD_card_content_defaults_E11_Beta_1' is required to complete the process and can be downloaded via the following article. ...The webpage of the TX-box is acting strange. General tips & guides to improve functionality.
SD-card compatibility Make sure a compatible SD-card is inserted into the TX-box. You can use 1GB micro SD and 2GB micro SD for all firmware versions. You can only use 4GB micro SDHC and 8GB micro SDHC for TXMETAWS_E09 and higher firmware. You can ...Notes when commissioning a VSD Vo module
1) Enable the use of an internal pressure sensor in Menu P03 IP = 1 if internal pressure sensing is available IP = 0 if not internal pressure sensor is used 2) Make sure parameter IC is set correctly in menu P03 and adjust the jumper inside of the ...