Update the TX-box software version to the latest software version
Consult the attached PDF document to learn how to complete this procedure.
The 'TX_SD_card_content_defaults_E11_Beta_1' is required to complete the process and can be downloaded via the following article.
Related Articles
How do I reset / restore / update the data and software on the SD-card inside my TX-box?
Before deleting anything from the SD-card, make a complete backup. Configurations done in the ‘DEFNET.JS’ file could be used in the future. In this file settings are stored such as the IP-address. In other words, make a backup, to consult previous ...How to update the software of the Metacentre VSD-box module?
This guide can apply to any Metacentre device that contains a S1 or T1 controller. In this example, the guide will specifically explain how to update the software / firmware of a Metacentre VSD-mA box. Using the USB-Nano device and the Flashtool ...Which SD cards can I use for the TX-BOX?
Q :Which types and sizes may be used for the TX-BOX? A :You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. software. You can use 4GB micro SDHC and 8GB micro SDHC, however these are only compatible with TXMETAWS_E09 and higher software. ...Metacentre Software IO Box: Control & Monitoring of Auxiliary Equipment
Here you can download the latest release of Metacentre IO box software. In order to use this software into the Metacentre IO box, you'll require FlashTool software and the USB Nano Programming Tool. See attachments tab to download.How to make a local connection with the TX-box
1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable. 2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection. ...