Which SD cards can I use for the TX-BOX?
Q :Which types and sizes may be used for the TX-BOX?
A :You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. software.
You can use 4GB micro SDHC and 8GB micro SDHC, however these are only compatible with TXMETAWS_E09 and higher software.
Other size or types are not applicable for the TX-Box.
When the size or type is not compatible, LED9 will flash red on the TX box.
When the size or type is not compatible, LED9 will flash red on the TX box.
Related Articles
SD card not reachable, what to do?
Q: Why is LED 9 on my TX box flashing red? A: LED 9 will flash red when your SD card is not recognized by the TX Box. A possible problem is the wrong type/size of the SD card. You can use 1GB micro SD and 2GB micro SD for all TXMETAWS_E.. ...How do I reset / restore / update the data and software on the SD-card inside my TX-box?
Before deleting anything from the SD-card, make a complete backup. Configurations done in the ‘DEFNET.JS’ file could be used in the future. In this file settings are stored such as the IP-address. In other words, make a backup, to consult previous ...The webpage of the TX-box is acting strange. General tips & guides to improve functionality.
SD-card compatibility Make sure a compatible SD-card is inserted into the TX-box. You can use 1GB micro SD and 2GB micro SD for all firmware versions. You can only use 4GB micro SDHC and 8GB micro SDHC for TXMETAWS_E09 and higher firmware. You can ...How to make a local connection with the TX-box
1. Connect the TX network port (picture below) to your computer’s network port by using a CAT5e network cable. 2. Open Local Area Connection. Click on Properties. Make sure you open Local Area Connection instead of Wireless Network Connection. ...Update the TX-box software version to the latest software version
Consult the attached PDF document to learn how to complete this procedure. The 'TX_SD_card_content_defaults_E11_Beta_1' is required to complete the process and can be downloaded via the following article. ...